Wood accessories & order forms

Drill Guide

carbon steel and stainless steel drill guide image
Drill straight holes through your wood posts with a steel Drill Guide. Use the Drill Guide to drill your pilot holes. Subsequent drills will follow pilot holes. Clamp the guide to post and drill. It is best to drill one side, then the other. When ordering, allow space for clamps. A 6” overalllength drill is included that can also be used to drill your cable through holes.

Drill Guide Order Form .pdf


Cable Support

carbon steel stainless steel cable support bar image
1/4” x 1” flat bar cable supports are used to prevent the cable from biting into the wood post where the cable enters or exits a wooden post at an angle, when the cables are tensioned. Available in mill finish carbon steel or #4 finish stainless steel.

Cable Support Order Form .pdf


Stainless Steel Post Protector Tube

stainless steel post protector tube image
The corner tube is inserted into a wood post where the cable enters/exits the post at an angle to keep the cable from biting into the wood.

When ordering, order CS - Tube


Hanger Bolt Driver

hanger bolt driver image Use to install Adjust-A-Body® with Hanger Bolt tensioners. Makes driving hanger bolts fast and easy.

Order DRIVER HB-6N
For 1/8” and 3/16” dia. cable


Cable Brace

carbon or stainless steel cable brace image
1/4” x 1” cable braces are used to support the cables between end or intermediate posts to keep the cable from flexing excessively when a load is applied. Cable braces are attached to the top rail and to the lower mounting surface, which can be a bottom rail or the deck. Available in mill finish carbon steel or #4 finish stainless steel.

Cable Brace Order Form .pdf


Cable Brace Floor Plates

cable brace stainless steel floor plate image

For mounting cable braces to top or bottom rail or deck.

Order Part NumberMaterialDimensions
FLP-CBMill Finish Carbon Steel2-1/4" x 1-1/4" x 1/4"
FLP-CBS#4 Finish Stainless Steel

Cut-Off-Tool

cut off tool disk for cable ends image
Used to cut cable fl ush with the end of Pull-Lock™ fi ttings, and to cut excess threads off stud-type tensioners. Includes mandrel and two cut-off wheels.

When Ordering, Order CUT-OFF KIT


Cable Release Key

cable railing release key image
Releases cable from Push-Lock™ and Pull-Lock™ type fittings before cables are tensioned.

When Ordering, Order PL-KEY Cable Release